Teltonika FM5500, Руководство пользователя

Страница: 42 / 155

42
Configuration of the parameters is available in Features->Geofencing (Figure 33)

Frame border – frame border is an additional border around Geofence zone. It is
additional area around defined zone used to prevent false event recording when
object stops on the border of the area and because of GPS errors some records are
made inside area and some – outside. Event is generated only when both borders are
crossed. See figure for details: track 1 is considered to enter the area while track 2
does not.
Track Nr. 1
Track Nr. 2
Figure 34 Geofence border

Shape – can be rectangular or circle

Priority – priority of Geofence event: low, high or panic, SW21, SW22, SW23, SW24.
These levels define priority of event information sending to server. See I/O element
description for more details about priorities.

Generate event (On entrance, On exit, On both) – choose when record will be
generated (or no event);

X1 – geofence zone left bottom corner X coordinate;

Y1 – geofence zone left bottom corner Y coordinate;

X2 or R – geofence zone upper right corner X coordinate (radius of circle when
Circular zone used);

Y2 – geofence zone upper right corner Y coordinate;
6.3.1.3.4.2 AutoGeofencing settings
AutoGeofence – the last known position after movement = off. If your car is being taken
away – you can be notified. The shape and size of the geofence zones are configurable. There is a
possibility to state whether entering in or out of the geofence triggers an asynchronous message.