Teltonika FM5500, Руководство пользователя

Страница: 97 / 155

97
This information is provided only as an example and Teltonika
takes no responsibility for information accuracy or damage that may be done
to the vehicle or FM5500 module while integrating it.
Example:
All Mercedes Benz Actros 2 models with Vehicle Identification Number (VIN) starting with
WDB93 have a possibility to connect FM5500 module to CAN bus. This can be done by
connecting to special PSM module (which may or may not be included in the truck) or ground
module of the vehicle. For CAN signal to be available, parameter 520 must be enabled in
“kommunikationsschnittstelle” in the vehicle with Mercedes Stardiagnose.
CAN wires can be found on X5 connector located in the fuse box (Figure 76):
Pin 5: CAN Low signal (yellow wire)
Pin 2: CAN High signal (blue wire)
Figure 76 X5 plug on Mercedes Benz
In the example FM5500 will filter all CAN messages with identifier FFFEE9FF (fuel
consumption) (Figure 77).
Figure 77 CAN parameter configuration example