Teltonika FM5500, Руководство пользователя

Страница: 32 / 155

32
SIM PIN allows to enter PIN code (visible only if PIN code request is enabled and PIN
code is required) if inserted SIM card has activated PIN code security
Add Keyword
3
/
Change Keyword /
Switch Security Off
buttons are used to protect configurator from unauthorized access to
configuration
Information area
FM5500 information area is divided into 2 parts located on the top right and bottom of the
configurator. When configurator is connected to the device via USB or COM1 port all necessary
information about the device is shown here:

IMEI – unique number for every FM5500 and usually servers recognize different
devices by this number;

SOURCE – configuration source (device or file);

VERSION – firmware version of the device;

HARDWARE VERSION – hardware version of the device;

STATUS – status bar;

SECURITY STATUS – status of the configurator security;

SIM PIN STATUS – status of SIM card in the device;
Profiles/global parameters selection area
FM5500 has 4 user editable profiles stored in Flash no. 1-4 memories and one extra profile
stored in Flash no. 0 which cannot be edited by user. Profile from Flash no. 0 is used by system
and cannot be selected as active, while profiles from Flash no. 1-4 are fully editable and can be
selected as active.
Reading profiles and Global parameters from Flash memory is a very simple procedure. By
pressing “Load” button all 4 profiles and Global parameters are loaded to the configurator
(Figure 22). To configure 3
rd
profile choose the TAB named “Profile 3” and all configurable
parameters of this profile will be available to change.
3
Keyword is of 4 - 10 symbol length (Latin text and/or numbers). If a keyword is set, every time user
reconnects FM5300 to USB or COM1 port he will be asked to enter a valid keyword when connecting FM5300 to
configurator. User is given 5 attempts to enter a valid keyword before blocking the configurator.