Note:
A summary of the following information is provided in Appendix 4 for
quick reference.
Programming Functions
Select the functions necessary for your application using any or all of those
described in this chapter. If a function must be used in conjunction with
another, both functions must be programmed.
Function 1: Password Assignment
A password may be any digit string from 3 to 10 digits long. Up to 25
passwords can be assigned. “User 1” is a privileged password for system
administration. (Default = enabled, but no passwords assigned.)
In addition to assigning passwords, password access must be enabled. Even if
passwords were assigned, the M-106E will process calls without password
entries if password access (Function 15) is disabled. To enable password
access, enter the following:
*15*1#
To assign a User 1 or system administrator password, enter the following:
*1*1*NN...N#*1*1*N...N#
where:
NN...N is the password (3 to 10 digits) in both places. (The
password for User 1 must be entered twice, as shown.)
To assign passwords for Users 2 through 25, enter the following:
*1*UU*NN...N#
where:
UU is the user number (1 or 2 digits)
NN...N is the password (3 to 10 digits)
To delete the User 1 password, enter:
*1*1*#*1*1*#
To delete any other password, enter:
*1*UU*#
where:
UU is the user number.
Function 2: Answer Tone Enable/Disable
When enabled, this function returns a 2 second answer tone to prompt the
caller to enter a password. This function can be disabled, if desired, to frustrate
attempts to break the M-106E access codes.
To enable answer tone (Default), enter:
*2*1#
Chapter 5: Programming the M-106E
106E-101, Issue 1
Page 25
