background image

 
Key 

Action 

FN  Acknowledges messages and displays Main screen 

DN 

Review MSG/Scroll Dn – to Main screen at 
bottom, also acknowledges messages 

UP  Review MSG/Scroll Up – to Main screen at top 

 
 
Display 1 

  

 
Message Time of Reception (24 hour format) and message number. 

 

Decimal Argos ID Code. 
Frequency in MHz of received message / First Data Byte. 
Next three data bytes. 
 

 
 
Additional screens of data are viewed by using the DN key.  When the last data screen of a message is 
displayed, additional pressing of the DN key will allow the user to display the previous message.  
Additional pressing of the DN key will then review the data screens of the previous message followed 
by the next previous message.  By pressing the DN key all stored messages may be reviewed by the 
user.  By pressing the UP key the user will move back up through the displayed messages, displaying 
only the first screen of multi-screen messages.  Message review is scrolled using the DN and UP keys, 
one message at a time with the most recent message displayed first. The scroll speed increases when 
the UP or Dn key is depressed for more than 2 seconds. When the last message is scrolled, a message 
indicating end of messages is displayed.   
 
The screen may be exited by three methods.   
1)  Pressing the FN key returns to the Main Screen at anytime in Message screen.   
2)  Pressing the UP key until the newest message is displayed then returns to Main Screen.   
3)  From the “End of MSGS” screen, pressing the DN key again will return to the Main Screen.  
 
When Update mode is off and the user is looking at data screens other than the first received message 
screen, and a new message is received, the receiver will “beep” indicating a new message was 
received, but the display will remain unchanged.  The user must depress the FN key to leave the 
current data display.  
 

Key 

Action 

FN  Displays Main screen 

DN 

Scrolls to next older message – exits to Main Screen 
when pressed displaying End of MSGS screen 

UP 

Scrolls to next newer message – exits to Main Screen 
when pressed displaying newest message 

Line 1

  15:46:22 #xx  

Line 2

 ? ID xxxxxx 

Line 3

  401.650  ddd  

Line 4

  ddd ddd ddd 

  

   

PB007326 Rev E
Page 6 of 24

 

 

Содержание TSUR-400

























Отзывы: