TSUR-400 Screen Display Types
The TSUR-400 has five different types of screens that may be displayed on the liquid crystal display
(LCD).
Power-up/Splash Screen
This is an informational screen which displays the TSUR-400 product model number, serial number,
software version and software revision date. This screen is displayed for 3 seconds upon power-up or
accessed by depressing the UP key when on the Main Screen. This screen cannot be modified. An
audible beep will be heard (if speaker is configured On) upon power-up.
Key
Action
FN
To Main screen
DN
To Main screen
UP N/A
Display
Line 1
TSUR-400
Line 2
S/N
Line 3
Ver x.xx
Line 4
yyyy.mm.dd
Product Model Number
Unit Serial Number
Software Version
Software revision date
Main Screen
Three seconds after the above depicted Power Up screen, the display changes to the Main screen which
displays the current date and time, number of stored messages, selected group or
all
ID codes, data
bytes
split
or decimal, and diagnostics (
dg
) on or off. Changes or modifications to these parameters
are initiated through menu screens.
Display Icons
A number of icons are used to depict various modes of receiver operation.
a)
Cursor position is indicated by alternating the character of the line selected from a black
character on white background to a solid black block.
b)
An antenna icon flashes on the left side of the screen signifying that the receiver is operating
and ready to receive messages.
c)
Next to the antenna icon is a series of increasing length vertical lines which depict received
signal strength when a signal is present.
d)
In the middle of the screen an envelope is shown when there are received messages that have
not been reviewed. After the user reviews all of the messages this icon is turned off.
e)
A telephone handset icon is turned on when the Audio mode is selected.
PB007326 Rev E
Page 4 of 24
