46
7 ROUTINE MAINTENANCE
ONLY PURCHASE AND USE ORIGINAL SPARE PARTS, WHICH ARE GUARANTEED BY THE
MANUFACTURER. CONTACT THE DEALER OR THE NEAREST SERVICE CENTRE TO REPLACE
FAULTY OR DAMAGED COMPONENTS.
7.1 Type of checks and interval between them
Regular checks of the operation of the parts of the machine most subject to stresses and wear can prevent faults and help
to maintain maximum productivity levels, guaranteeing lasting constant operation.
7.2 Maintenance work
Maintenance is the set of organised operations which must be carried out on machine parts in a regular, systematic way.
Routine adjustment and maintenance operations carried out by the operator must be performed
with the machine disconnected from the mains power supply.
Routine maintenance:
1) checking the integrity of parts subject to wear, such as the seal gaskets.
2) checking that the machine does not make any unusual noises.
3) keeping outer panels and the area near to and under the machine clean. Dust, scraps of paper or
other small objects may get into the equipment through the air inlets and/or block the regular inflow
of air to the condenser, quickly compromising correct machine operation.
7.3 Maintenance intervals and time needed
The interval calculated for each piece of maintenance work and the time needed to do the work are approximate and allow
the creation of a maintenance programme.
Correct machine operation can only be guaranteed by methodical, regular maintenance.
The table below shows the type of work involved in routine maintenance and the intervals between jobs:
When?
Where?
How?
Every 500 hours or quarterly
Dispensing tap gaskets
Replace
Every month
Mixing impeller guide bushing
Replace
Daily (at machine switch on)
Safety devices installed
Check that they work
with
the
procedures
described
in
section
7.5
Yearly
All internal machine parts
They must be checked and tested by a
qualified technician
Содержание EVOPASTO 120
Страница 2: ...2...
