37
-Then close the cover and press the “PASTEURISING CYCLE”
button (B) to start the operating cycle.
DURING THE PRODUCT HEATING PHASE DO NOT TOUCH THE PRODUCT, THE COVER AND
THE UPPER SURFACE OF THE MACHINE. THE HIGH TEMPERATURE REACHED (+85°C) COULD
CAUSE SERIOUS BURNS TO THE OPERATOR.
WE RECOMMEND USING HEAT PROTECTION GLOVES AND CLOTHING.
Do not insert in the tank a quantity of mixture less than ½ of tank capacity, to prevent:
- spray that could cause the formation of ice on the sides of the tank during the mixture cooling
phase;
- formation of froth in the mixture.
Do not insert more than the recommended quantity of mixture in the tank, otherwise the product
could spill out of the tank.
After inserting the ingredients in the tank, you can pre-mix them, before starting the pasteurising cycle, so as to make them
homogeneous.
-Close the cover and press the “SLOW STIRRING" button (C) to
pre-mix the ingredients.
-Press the button again to end the slow stirring.
If you intend to change the heating and cooling temperature values for the mixture to be pasteurised, follow the instructions
in sec. 5.3 “Programming” of this manual:
-Press the “PROGRAMMING” button and adjust the tempera-
tures "P1".
B
C
C
Chapter 5
Using the machine
TELME S.p.A.
Via S. Pertini, 10 - 26845 Codogno (LO)
Tel.: +39 0377 466.650 - [email protected]
Содержание EVOPASTO 120
Страница 2: ...2...
