manualshive.com logo in svg

Telme EVOPASTO 120, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Telme EVOPASTO 120 Скачать руководство пользователя страница 41

41

-   Close the machine cover and press the SLOW STIRRING 

button (E), leaving the mixing impeller operating for around 2 

minutes.

-   Open the dispensing tap using the related lever and let the deter-

gent solution flow out into a suitable container placed under it.

-   Press the SLOW STIRRING button (E) again to stop the mixing 

impeller.

3. Rinse to remove detergent phase:

After washing with detergent, a thorough rinse of the tank and the dispensing tap with cold water is needed to completely 

remove any detergent residues still present inside them.

-   Place a suitable container (A) under the dispensing tap (B).

-   Open the cover (C).

-   Rinse the tank using a water container (D) or a shower (E). 

-   Open the dispensing tap (B) using the related lever to allow the 

rinsing water to flow out.

4. Washing machine components phase:

To thoroughly wash them with detergent, remove all components installed on the machine as follows:

a) Removing  components:

 

•

Removing the cover

 

–

Pull the fixing pins (1) out of the block horizontally and remove 

the cover (2).

E

A

B

C

E

D

B

1

2

  

Chapter 6 

Washing

TELME S.p.A.

Via S. Pertini, 10 - 26845 Codogno (LO)

Tel.: +39 0377 466.650 - [email protected]

Содержание EVOPASTO 120

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды