tell Gate Control BASE 1000 Series Скачать руководство пользователя | Manualshive

Страница: 23 / 55

background image

23

Miscellaneous settings:

Administrator’s e-mail address

: the system sends notifications about version updates to the

e-mail address specified here.

SMS forwarding phone number

: the system can forward messages received on the SIM card

installed in the device to the phone number specified here (e.g. balance information received
from the mobile service provider in case of using a pre-pay card). Received messages are
deleted automatically after forwarding. If no phone number is configured, the system deletes all
incoming messages without forwarding.

SMS forwarding daily limit

: with this option you can limit the number of SMS messages to be

forwarded  per  day.  When  the  configured  limit  is  reached,  the  system  will  not  forward  new
incoming  SMS  messages  for  24  hours.  After  24  hours,  the  counter  resets  automatically  and
message forwarding  will  be  enabled  again  up  to  the  configured  limit.  In  case  of entering  value
“0”,  SMS  forwarding  will  be  disabled,  i.e.  incoming  SMS  messages  will  not  be  forwarded,  but
deleted  automatically.  The  SMS  forwarding  daily  limit  can  be  disabled  and  set  to  unlimited  by
deleting the entered value.
Attention!  After  reaching  the  configured  limit,  but  still  before  the  message  counter  is  reset,  the
system deletes all incoming messages without forwarding!

SMS sending daily limit

: with this option you can limit the number of SMS messages generated

by activating the inputs. When the configured limit is reached, the system will not send further
SMS messages generate by inputs for 24 hours. After 24 hours, the counter resets automatically
and message sending will be enabled again up to the configured limit. In case of entering value
“0”, input-generated SMS sending will be disabled. The SMS sending daily limit can be disabled
and set to unlimited by deleting the entered value.
Attention! Messages generated after reaching the configured limit, but still before the message
counter is reset will neither be sent subsequently, but the system records the events in the event
logs.

«
...
21
22
23
24
25
...
»

Содержание Gate Control BASE 1000 Series
























































Отзывы:

Нет отзывов

Похожие инструкции для Gate Control BASE 1000 Series

Бренд: V2 Страницы: 29

LiftMaster PROFESSIONAL LYN300 Series

Бренд: Chamberlain Страницы: 99

Бренд: Nice Страницы: 148

Бренд: Edlund Company Страницы: 2

Бренд: Hy-Security Страницы: 65

Бренд: Rival Страницы: 12

Бренд: EasyWay Страницы: 145

Бренд: DITEC Страницы: 122

Бренд: Beninca Страницы: 32

Бренд: JAROLIFT Страницы: 56

Бренд: CAME Страницы: 12

Бренд: GBD Страницы: 16

Бренд: Chamberlain Страницы: 4

Bettis GVO-HP-FS Linear

Бренд: Emerson Страницы: 48

Бренд: AutoGate Страницы: 15

Бренд: Mighty Mule Страницы: 2

Бренд: Linear Страницы: 2

Бренд: Richmond Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды