tell Gate Control BASE 1000 Series Скачать руководство пользователя

Страница: 21 / 55

5.2.1 General

In this menu you can configure the parameters related to the general operation of the device.

Available options:



Reading the settings from the device:

To read the settings from the device click

on the “

Read settings

” button. This will

read all settings in all menus in the “

Device settings

” menu group.



Writing the settings into the device:

After changing the settings or entering new settings, in order to take effect in the
system, it is necessary

to write the settings into the device by clicking on the “

Write

settings

” button. This will write into the device the values changed in the menus in

the

“

Device settings

” menu group.



Creating a system backup:

To create a full system backup, i.e. to save the device settings and users to file,
click on the “

Create system backup

” button, select the target folder, enter a name

for the file, and then click on the “

Save

” button.



Restoring the system from a system backup:

To restore the settings and users from

a system backup, click on the “

Restore

from backup

” button, browse the backup file, click on the “

Open

” button, and then

write the imported

settings into the device by clicking on the “

Write settings

”

and

“

Write users

”

buttons. This option is only available when connected via USB.

Содержание Gate Control BASE 1000 Series
























































Результаты поиска

Содержание Gate Control BASE 1000 Series

Отзывы:

Похожие инструкции для Gate Control BASE 1000 Series

Бренды по названию

Популярные бренды

tell Gate Control BASE 1000 Series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Gate Control BASE 1000 Series

Отзывы:

Похожие инструкции для Gate Control BASE 1000 Series

Бренды по названию

Популярные бренды