Steady: You are in handsfree mode.
Steady: The handset ringer is off (set to silent).
Steady: The signal strength is sufficient.
Blinking: The signal strength is getting weaker.
Steady: Indicates the battery charge level.
Blinking: Batteries low. Please recharge.
11
3.2
Receiving incoming calls
If you receive an incoming call, the handset will emit a ring signal and
the handset display shows
CALL
followed by the callers telephone
number (Identicall subscription required) and the symbol flashes on
the display.
Notice
: While the handset is ringing you can use the
p
and
q
buttons
to adjust the ring volume.
Press the button on the handset to take the call or the button to
answer the call in handsfree mode. If the handset is on the base, simply
lift it and speak (if auto pick up answer is on).
To end the call, replace the handset on the base station or press the
button on the handset.
You will find information on Calling Line Identification in chapter 5.
When automatic answering is switched on, the call will be automatically
taken as soon as you lift the handset from the base station. To find out
how to turn the automatic answer function on and off, see chapter 7.4.
3.3
Dialing a number
1.
Use the keypad to enter the desired telephone number. Up to
24 digits may be entered. The digits dialed will be shown on
the display. Since the display can only display 11 digits, only
