10
2.8
Wall mounting the phone
You can mount your telephone directly against a wall, or place it on a
shelf, desk or table.
The unit can be mounted to any wall surface using two self-tapping
screws (not supplied). In order to mount your phone on a wall, the base
station stand must not be fitted (See 2.3).
1.
Drill two holes in the wall 45mm horizontally apart using a
8mm drill bit.
2.
Insert wall plugs into each hole.
3.
Then thread a screw into each hole, letting the heads extend
about 5mm from the wall. Position the base over the two
screw heads and push downwards.
3.
Normal Use
3.1
The display
During normal operation, the display shows the date, time in hour and
minutes and HANDSET 1. The default name can be re-programmed any
time, see chapter 7.6.
The display also provides symbol representation of all the main
functions and the current status of the phone.
Steady: You are making a call.
Blinking: There is an incoming call.
Steady: There are missed calls and new calls have been
stored in the CLI list.
Steady: Shows phonebook in use.
Steady: The alarm has been set.