SE867-AGPS User Guide
1VV0300860 Rev. 3 - 2010-05-10
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 49 of 69
The navigation mode can be switched by the following command
$PUNV,CONFIG,NAVMODE,
Mode
*cc
or
,
Mo
$PUNV,SET,NAVMODE
de
*cc
Name
Format
Valid values
Default value
Description
Mode
String
PED, VEHICLE VEHICLE
SE867-AGPS navigation mode:
PED – PEDESTRIAN
VEHICLE – VEHICLE
In case of the successful execution of
command, the receiver sends the confirmation in the following form:
command the receiver
(10.1.2.17).
10.1.3.5.
n
on is used to configure the SBAS functionality.
Please note that SBAS configuration through NMEA command affects the current
tion 10.1.3.4 for the navigation models details.
be read in the system with the following command:
NV,GETC
FIG,11*41
answer is
ollows:
$PUNV,CFG_R,11,
X
,
X
,
X
,
X
,
X
,
X
,
X
,
X
,
Sbas
,
X
,
X
,
X
*cc
$PUNV,CONFIG,NAVMODE,
Mode
*cc
$PUNV,CFG_S,11*53
In case of failure of the execution of GETCONFIG, CONFIG or SET
sends the ERR reply message. Please see the ERR section for details
SBAS Configuratio
SBAS configurati
navigation mode only. Please see sec
The current SBAS configuration can
$PU
ON
The
as f
Name
Format
Valid values
Default value
Description
X
N/A
N/A
N/A
N/A
Sbas
Decimal
Number
0,1
1
SBAS master control:
0 - SBAS is switched off,
1 - SBAS is switched on.
X
N/A
N/A
N/A
N/A
