Telit Wireless Solutions HE910-EU V2, Руководство пользователя по оборудованию

Страница: 10 / 78

This document contains the following chapters:
Chapter 1: “Introduction”
provides a scope for this document, target audience, contact and
support information, and text conventions.
Chapter 2: “General Product Description”
gives an overview of the features of the product.
Chapter 3: “HE910 V2 Module Connections”
deals with the pin out configuration and layout.
Chapter 4: “Hardware Commands”
How to operate the module via hardware.
Chapter 5: “Power supply ” Power supply requirements and general design rules.
Chapter 6: “Antenna”
The antenna connection and board layout design are the most important
parts in the full product design.
Chapter 7: “USB Port” The USB port on the Telit HE910 V2 is the core of the interface
between the module and OEM hardware.
Chapter 8: “Serial ports” Refers to the serial ports of the Telit HE910 V2.
Chapter 9: “Audio Section overview” Refers to the audio blocks of the Base Band Chip of the
HE910 V2 Telit Module.
Chapter 10: “General Purpose I/O” How the general purpose I/O pads can be configured.
Chapter 11: “DAC and ADC section” Deals with these two kinds of converters.
Chapter 12: “Mounting the Module on the application board” Mechanical dimensions and
recommendations on how to mount the module on the user’s board.
Chapter 13: “Packing System” Deals with packing system.
Chapter 14: “Application Design Guide” Deals with the application design of host system.
Chapter 15: “Conformity Assessment Issues” provides some fundamental hints about the
conformity assessment that the final application might need.
Chapter 16: “Safety Recommendation” provides some safety recommendations that must be
followed by the customer in the design of the application that makes use of the Telit HE910
V2.
Chapter 17: “Document History”