GE866-QUAD Hardware User Guide
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved.
Page 10 of 82
Mod. 0805 2011-07 Rev.2
1.4.
Document Organization
This document contains the following chapters:
Chapter 1: “Introduction” provides a scope for this document, target audience,
contact and support information, and text conventions.
Chapter 2: “Overview”
provides an overview of the document.
Chapter 3: “
GE866-QUAD
Mechanical Dimensions”
Chapter 4: “
GE866-QUAD
Module Connections” deals with the pin out configuration
and layout.
Chapter 5: “Hardware Commands” How to operate on the module via hardware.
Chap
ter 6: “Power supply” Power supply requirements and general design rules.
Chapter 7: “Antenna” The antenna connection and board layout design are the most
important parts in the full product design.
Chapter 8: “Logic Level specifications” Specific values a
dopted in the implementation
of logic levels for this module.
Chapter 9: “Serial ports” The serial port on the Telit
GE866-QUAD is the core of the
interface between the module and OEM hardware
Chapter 10: “Audio Section overview” Refers to the audio blocks
of the Base Band
Chip of the GE866-QUAD Telit Modules.
Chapter 11: “General Purpose I/O” How the general purpose I/O pads can be
configured.
Chapter 12 “DAC and ADC Section” Deals with these
two kind of converters.
Chapter 13: “
Mounting the GE866 on your Board
”
Recommendations and specifics on
how to mount the module on the user’s board.
Chapter 14: “Packing system” Recommendations and specifics on how the system is
packaged.
Chapter 15
: “Safety Recommendations”
Recommendations and specifics on how the
system is packaged.
Chapter 16
: “Document History” Holds all document changes
