Internet Phone User Manual
40
providers use the Mac address of the LAN card of the PC for authentication. In this
case, please reset the cable modem memory by turning off its power, and turn it on
again. If the cable modem is turned on, turn off the power of the Internet phone.
After a few minutes, turn on the power of Internet phone again, and see if the
Internet connection can be done from the PC.
③
PPPoE(ADSL)
user
If you are a PPPoE(ADSL) user, please select this menu and setup the needed
settings.
Warning : PPPoE users, before product installation, should remove the automatic
ADSL connection program installed on the PC. If the automatic ADSL connection
program is not uninstalled, there may be problems with Internet connection after
product installation.
STEP 1
Select ‘3: PPPoE’ to setup PPPoE related parameters.
y
Use Navigation key to select the
menu.
y
Press ‘Cancel’ key to return to the
upper menu..
STEP 2
Enter the PPPoE ID into the input line, and press ‘OK’ button.
y
Press ‘OK’ button to proceed to the
next step.
y
Press ‘Cancel’ key to move to the
upper menu.
<MODE SELECT>
2:DHCP
3:PPPoE
▼
<PPPoE Setup>
1:PPPoE ID
[Input user ID]
Содержание 3200 series
