PRISM Field Upgrade Kit Instructions
vii
Power disconnect:
The power cord disconnects the product from the power source. See
instructions for the location. Do not position the equipment so that it is difficult to
operate the power cord; it must remain accessible to the user at all times to allow for
quick disconnection if needed.
Observe all terminal ratings:
To avoid fire or shock hazard, observe all rating and
markings on the product. Consult the product manual for further ratings information
before making connections to the product. Do not apply a potential to any terminal,
including the common terminal, that exceeds the maximum rating of that terminal.
Do not operate without covers:
Do not operate this product with covers or panels
removed, or with the case open. Hazardous voltage exposure is possible.
Avoid exposed circuitry:
Do not touch exposed connections and components when power
is present.
Do not operate with suspected failures:
If you suspect that there is damage to this
product, have it inspected by qualified service personnel.
Disable the product if it is damaged.
Do not use the product if it is damaged or operates
incorrectly. If in doubt about safety of the product, turn it off and disconnect the power
cord. Clearly mark the product to prevent its further operation.
Before use, inspect voltage probes, test leads, and accessories for mechanical damage
and replace when damaged. Do not use probes or test leads if they are damaged, if there
is exposed metal, or if a wear indicator shows.
Examine the exterior of the product before you use it. Look for cracks or missing pieces.
Use only specified replacement parts.
Do not operate in wet/damp conditions: Be aware that condensation may occur if a unit
is moved from a cold to a warm environment.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry: Remove the input signals before you clean the
product.
Provide proper ventilation: Refer to the manual's installation instructions for details on
installing the product so it has proper ventilation.
Slots and openings are provided for ventilation and should never be covered or otherwise
obstructed. Do not push objects into any of the openings.
Provide a safe working environment: Always place the product in a location convenient
for viewing the display and indicators.
Be sure your work area meets applicable ergonomic standards. Consult with an
ergonomics professional to avoid stress injuries.
Use only the Telestream rackmount hardware specified for this product.
