8
PRISM Field Upgrade Kit Instructions
13.
Use the TORX-driver with a T-10 TORX tip to install the two screws in the
Eye mezzanine board as shown in the following figure. Tighten these screws
to 0.6 N·m (5.31 in-lb).
Figure 10: Finish the 12G Eye mezzanine board installation
14.
Replace the two BNC nuts and lock washers. Tighten the BNC nuts to
1.0 N·m (8.85 in-lb).
15.
Place the top cover over the instrument and use the TORX-driver with a T-10
TORX tip to reinstall the screws. Tighten these screws to 0.9 N·m (7.97 in-lb).
