![background image](http://html1.mh-extra.com/html/telesite/quicksilver-dv202s/quicksilver-dv202s_installation-and-operation-manual_1082174018.webp)
10
••••
Installation
TX001-00-00 Rev 101 QuickSilver DV202S Video Transmitter
5. Connect the telephone cable to the socket labeled LINE, or TELCO on the Modem. Orient the tab into the
slot and press the RJ-11 plug straight in to the socket until a snap is heard, indicating that the two
connectors are locked. If it is desired to share this line with a telephone, connect a standard telephone RJ-
11 plug to the socket labeled PHONE on the Modem. For the I-MODEM Modem, the telephone socket is
labeled ISDN and is an RJ-45 type. A standard telephone can be plugged into one of 2 telephone cable
sockets labeled PHONE1 and PHONE2 that are RJ-11 type.
6. Connect the provided power supply cable DIN type plug to the DC IN socket on the Transmitter. Line up
the plug and socket pins and press the plug straight into the socket. Connect the female end of the
provided AC power cord to the power supply and the male end into a convenient AC wall receptacle.
7. Connect the provided power supply cable coaxial plug to the DC power socket on the Modem and the AC
plug into a convenient wall receptacle.
8. It is recommended to recheck all wiring for accuracy and stress points. If necessary, create harnesses
with individual cables and use tie wraps to hold them securely to designated anchor points.
9. Power-on the Modem and Transmitter. The Power-on LEDs should illuminate. For the specific LED
sequence of the ISDN Modem, refer to the specific ISDN sub-section. The yellow LED on the Transmitter
should blink for a few seconds and then remain off. If this LED remains blinking or is on solid, there is a
problem with modem initialization or the unit itself. Recheck all connections and the power-on condition of
the modem.
10. Refer to the Operation section of this manual.
Содержание QuickSilver DV202S
Страница 2: ......
Страница 4: ......
Страница 8: ......
Страница 14: ...6 Installation TX001 00 00 Rev 101 QuickSilver DV202S Video Transmitter Figure 6 Transmitter Quick Installation...