Installation, Outdoor HPO PowerMAX System
215861 REV C
23
2.1.7 Install Optional AC Distribution Box
The optional AC Distribution Box was shipped with its mounting bracket attached to the
unit. The hardware used to attach the supports was shipped in place in the uni-strut
frame. Place the AC Distribution Box on the top of the frame, centered between the uni
-strut frames, and with the hinged cover facing the RF Input end of the system.
Secure the mounting bracket to the uni-strut frame as shown in
Figure 2-21
.
Connect the power cables to each of the SSPA Modules in the system. Each power
cable is labeled near the connector end to identify to which SSPA Module it should
connect.
Figure 2-21: Install Optional AC Distribution Box
