Installation, Outdoor HPO PowerMAX System
215861 REV C
11
2.1.1 Prepare Location Decking
The Outdoor PowerMAX System is designed to be installed on a flat, level, solid sur-
face with the capability of anchoring the uni-strut frame assemblies to the decking.
Figure 2-2
shows the typical dimensions of the base mounting installation and
anchor points for the system and an optional Maintenance Switch/Termination Assem-
bly. An outline drawing specific to your system will be included with your system.
The RF Distribution Box and Outdoor Controllers will be mounted on the uni-strut
frame opposite the RF Output. The optional AC Distribution Box will be mounted at the
top of the uni-strut frame, between the two uni-strut frames.
The indoor controller for the optional Maintenance Switch requires installation in a cli-
mate controlled environment.
Figure 2-2: Installation, Base Mounting and Anchor Points, 8-way System
