Installation, Outdoor HPO PowerMAX System
215861 REV C
45
3.1.6 Install System Termination
Remove the 10-32 hardware from the uni-strut assemblies installed in
Section 3.1.2.9
,
and as shown in
Figure 3-13
. Save this hardware.
Install the system termination as shown in
Figure 3-13
, with the right-angle termina-
tion pointing towards system S2.#.#. Use the hardware removed above to secure the
termination support to the uni-strut assembly.
On the lower side, remove the mounting hardware from the termination assembly and
adjust the magic tee termination lower support bracket installed in
Section 3.1.2.6
to
align the mounting holes, as shown in
Figure 3-14
. Secure with hardware as shown.
Figure 3-13: Installation, System Termination, Upper View
Figure 3-14: Installation, System Termination, Lower View
