Installation, Outdoor HPO PowerMAX System
215861 REV C
19
Insert an appropriately sized full gasket (provided) in the grooved flange of the Magic
Tee. Secure the waveguide flange of the termination to the waveguide flange of the
Magic Tee as shown in
Figure 2-14
.
2.1.5.3 Connect Flexible Waveguide
The Output Magic Tee is connected to the Magic Tee of each 4-way half with flexible
waveguide. Insert an appropriately sized half gasket (provided) in the grooved flange of
the Magic Tees to either side of the flex waveguide segments. Connect the waveguide
between the Magic Tees as shown in
Figure 2-15
for each system. Tighten the out-
put magic tee support 1/2” hardware (installed in
Section 2.1.5
and
Figure 2-11
).
Figure 2-14: Connect Termination W/G Flange to Output Magic Tee
Figure 2-15: Install Flex Waveguide
