1
2
3
Front Connections
1.
Serial Port – Configured as COM1 device at 11520,8,0,1,0.
2.
LEDs: Power/HDD
3.
Two USB 2.0 ports. Typically used to connect PL-USB I/O module.
4.
Two Gigabit Ethernet ports for network and 3
rd
party device connections. Default IP
settings as follows:
Marking
Connection
LAN1 Dynamic IP Address
DHCP enabled
LAN network 1
LAN2 Static IP Address
192.168.15.1
LAN network 2
5.
Four Gigabit PoE compliant Ethernet camera ports.
Note:
POE cannot be disabled.
Default IP settings are as follows (these can optionally be changed through the
Windows network “change adapter settings” interface):
Marking
Connection
CAM1 Static IP Address
192.168.11.1
Camera port 1
CAM2 Static IP Address
192.168.12.1
Camera port 2
CAM3 Static IP Address
192.168.13.1
Camera port 3
CAM4 Static IP Address
192.168.14.1
Camera port 4
LAN left LED: Off = 10 Mbits/s; GREEN = 100 Mbits/s; ORANGE = 1000 Mbits/s
LAN right LED: ON = port active; BLINK = port traffic
Note:
Camera Ethernet cables must be type Cat5e. Use A-CAB-GE-X.
9
5
4
GV 400 Installation
Version 1.3; 2020-5-14
