Teledyne Genie Nano Series Скачать руководство пользователя страница 2

Страница: 2 / 121

Notice

All information provided in this manual is believed to be accurate and reliable. No responsibility is

assumed by Teledyne DALSA for its use. Teledyne DALSA reserves the right to make changes to

this information without notice. Reproduction of this manual in whole or in part, by any means, is

prohibited without prior permission having been obtained from Teledyne DALSA.

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and

other countries. Windows, Windows Vista, Windows 7 are trademarks of Microsoft Corporation.

All other trademarks or intellectual property mentioned herein belong to their respective owners.

Document Date: October 6, 2015

Document Number: G3-G00M-USR00

About Teledyne DALSA

Teledyne DALSA is an international high performance semiconductor and electronics company that

designs, develops, manufactures, and markets digital imaging products and solutions, in addition

to providing wafer foundry services.

Teledyne DALSA Digital Imaging offers the widest range of machine vision components in the

world. From industry-leading image sensors through powerful and sophisticated cameras, frame

grabbers, vision processors and software to easy-to-use vision appliances and custom vision

modules.

Содержание Genie Nano Series


























































































































Результаты поиска

Содержание Genie Nano Series

Отзывы:

Teledyne Genie Nano Series, Руководство пользователя, Страница: 2 / 121

Результаты поиска

Содержание Genie Nano Series

Отзывы: