Teledyne 6750 Скачать руководство пользователя страница 14

Страница: 14 / 96

Introduction

Model 6750

Teledyne Analytical Instruments

•

RS-232C and RS-485 outputs

•

Separate electronics and liquid compartments

1.2 Options

The following options are available for the Model 6750 TOC

Analyzer and are described in Appendix A.3:

•

Correlated BOD/COD

•

Dual NDIR Analyzers

•

Benchmark/Auto Validation

•

Auto-Cal/Auto-Clean

•

Automatic Multi-Range

•

Multi-Stream Analysis

•

DBPR Drinking Water

1.3 Typical Applications

With excellent TOC accuracy from low parts-per-million to high

concentration levels of salt-free samples, the Model 6750 is used in a
variety of applications including:

Boiler Feedwater

Standard Method 5310 C/D

Cooling Water

EPA 415.1

Drinking Water

EPA 9060

Wastewater (limited)

ASTM D 4839-88

River Water

ASTM D 4779-88

Oil in Water

1.4 Intended Use of the Analyzer

The Analyzer is exclusively designed for monitoring of Total

Organic Carbon (TOC) in water. This intended use involves carefully
following the instructions provided in this manual and observing all
indicated warnings, hints and instructions.

Содержание 6750

































































































Результаты поиска

Содержание 6750

Отзывы:

Teledyne 6750, Руководство по эксплуатации, Страница: 14 / 96

Результаты поиска

Содержание 6750

Отзывы: