WavePro HD Getting Started Guide
11
OVERVIEW
A
menu bar
of drop-down menus lets you access all functionality.
If an action can be “undone” (such as recalling a setup), a small
Undo button
appears at the far right of the menu bar. Click this
to return to the previous oscilloscope display.
The
grid area
displays the waveform traces. You can adjust the
brightness of the graticule, or change the number and style of grids.
Trigger level
(vertical axis) and
trigger time
(horizontal axis) indicators
appear on the grid when a trigger is set, color-coded to match the source.
Cursors
show where measurement points have been set. Touch-and-drag
cursor indicators to quickly reposition the measurement point. Vertical
cursor readout appears on the Channel descriptor box; Horizontal cursor
readout appears below the Timebase and Trigger descriptor boxes.
Trace descriptor boxes
appear along the bottom of the grid area, one for
each open trace. They adjust in size and detail as more are opened.
The
Add New box
sits next to the trace descriptor boxes. Use it to turn on
new traces or the Measure table. See MAUI with OneTouch on p.15.
Timebase and Trigger
descriptor boxes
appear at the right of the display.
Timebase and Trigger settings only apply to channel traces. Touch the
descriptor box to open the corresponding set up dialog.
Dialogs
appear at the bottom of the display for entering set up data. The
top dialog will be the main entry point for the selected function.
For convenience, related dialogs appear as a series of tabs behind the
main dialog. Touch the tab to open the dialog
The
Action toolbar
on the main Channel, Math and Memory dialogs offers
shortcuts to common actions so you don’t have to leave the underlying
dialog. Actions always apply to the active (highlighted) trace.
Apply up-to-12 measurement parameters
Display a zoom of the trace
Apply a math function to the trace
Open the Serial Decode dialog (if decoders are installed)
Copy the active trace to the corresponding
internal memory (e.g., C2 to M2)
Scale the waveform to fit the grid
Move the active trace to the next grid
Apply a custom label to the trace