929412-00 Rev A
8
OVERVIEW
Probes
WavePro HD oscilloscopes are compatible with the included passive
probes and most Teledyne LeCroy
ProBus
and
ProBus2
active probes
that are rated for the oscilloscope’s bandwidth. Probe specifications and
documentation are available at
teledynelecroy.com
/
probes.
Digital Leadset
Delivered with the purchase of a Mixed Signal (-MS) model, the
digital
leadset
enables input of up-to-16 lines of digital data. Lines can be
organized into two logical groups representing different buses and
renamed appropriately.
The digital leadset features two digital banks with separate threshold and
hysteresis controls, making it possible to simultaneously view data from
different logic families.
Each flying lead has a signal and a ground connection. A variety of ground
extenders and flying ground leads are available for different probing
needs. To achieve optimal signal integrity, connect the ground at the tip
of the flying lead for each channel used in measurements. Use either the
provided ground extenders or ground flying leads to make the ground
connection.
To connect the leadset to the oscilloscope, push the connector into the
mixed signal interface below the front panel until you hear a click.
To remove the leadset, press in and hold the buttons on each side of the
connector, then pull out to release it.