Teledyne Lecroy WaveJet Touch, Руководство по началу работы

Страница: 31 / 40

BASICS
27
WaveJet Touch Getting Started Guide
Print
The PRINT button captures the entire visible screen as an image and
either sends it to a printer or saves it as an image file on a connected
USB drive. Images printed to a USB drive can be saved in .tiff, .bmp, or
.png format. By default, image files are named “SCRN####,” and the
oscilloscope automatically increments the number with each capture.
To configure how PRINT works, press UTILITIES and choose Print from
the Utilities menu. To make a print, just press PRINT.
Utilities
Most oscilloscope properties settings can be found on the Utilities menus.
Press the UTILITIES button to display them. Menus include:
•
Print setup
•
Config .(uration) of oscilloscope Language, Date & Time, Offset Set-
ting units, Delay Setting units, Beep (sound/mute), Panel Lock, grid
Graticule, Grid Intensity, Trigger Counter, and Power Measurement
•
Calibration setup
•
Status & Update of oscilloscope hardware and firmware
•
Remote control setup
•
Aux Out connector setup