Teledyne Lecroy WaveJet Touch, Руководство по началу работы

Страница: 28 / 40

BASICS
24
Measurements & Statistics
Measurements are waveform parameters that can be expressed as numerical values, such as amplitude or frequency. You can set up-to-four
simultaneous measurements on one or more traces and view the active readout in a table. Statistical measurements can be added to the readout table.
Pass/Fail conditions can be set on measurement results; see the
WaveJet Touch Operator’s Manual for instructions.
Press MEASURE to open the Measure setup
menu.
Select the measurement number (A-D).
Touch to choose source channel.
Touch to choose parameter.
To add statistics to the readout, touch Next to
go to page 2 and turn Min/Max On.
Measurement readout appears in a table below
the grid.
A
B
C
D
E
F
B
C
D
E
F
A