Teledyne Lecroy Frontline BPA 600, Руководство пользователя по аппаратному и программному обеспечению, Страница: 59 / 348

The
RFCOMM Set Initial Decoder Parameters
tab requires the following user inputs to complete a
parameter:
l
Stream - Identifies the role of the device initiating the frame (master or slave)
l
Server Channel
- The Bluetooth® channel number 0 through 78
l
DLCI - This is the Data Link Connection Identifier, and identifies the ongoing connection between a client
and a server
l
Data Source (DS) No .- When only one data source is employed, set this parameter to 0 (zero),
otherwise, set to the desired data source
l
Carries (UUID)
- Select from the list to apply the Universal Unique Identifier (UUID) of the application
layer that RFCOMM traverses to from the following:
o
OBEX
o
SPP
o
encap asyncPPP
o
Headset
o
FAX
o
Hands Free
o
SIM Access
o
VCP
o
UDI
o
-Raw Data-
Adding, Deleting, and Saving RFCOMM Parameters
1. From the Set Initial Decoder Parameters window, click on the RFCOMM tab.
2. Set or select the
RFCOMM
decoder parameters.
3. Click on the ADD button. The Initial Connection window displays the added parameters.
Figure 3.31 - Parameters Added to Decoder
4. To delete a parameter from the Initial Connections window, select the parameter and click on the
Delete button.
5. Decoder parameters cannot be edited. The only way to change a parameter is to delete the original as
described above, and recreate the parameter with the changed settings and selections and then click
on the
Add button.
6. RFCOMM parameters are saved when the template is saved as described in on page 1
3.2.5.2 RFCOMM Missing Decode Information
ComProbe software usually determines the protocol carried in an RFCOMM payload by monitoring previous
traffic. However, when this fails to occur, the
Missing Decoding Information Detected
dialog appears
TELEDYNE LECROY Chapter 3 Configuration Settings
51 Frontline BPA 600 Hardware & Software User Manual