Teledyne Lecroy Frontline BPA 600, Руководство пользователя по аппаратному и программному обеспечению, Страница: 53 / 348

Figure 3.23 - AVDTP parameters tab
The
AVDTP
tab requires the following user inputs to complete a parameter:
l
Piconet (Data Source (DS) No.) - When only one data source is employed, set this parameter to 0
(zero), otherwise, set to the desired number of data sources.
l
Role
- This identifies the role of the device initiating the frame (
Master
or
Slave
)
l
L2CAP Channel - The channel number 0 through 78.
o
L2CAP channel is Multiplexed - when checked indicates that L2CAP is multiplexed with upper
layer protocols.
l
AVDTP is carrying
- Select the protocol that AVDTP traverses to from the following:
o
AVDTP Signaling
o
AVDTP Media
o
AVDTP Reporting
o
AVDTP Recovery
o
-Raw Data-
Adding, Deleting, and Saving AVDTP Parameters
1. From the Set Initial Decoder Parameters window, click on the AVDTP tab.
2. Set or select the
AVDTP
decoder parameters.
3. Click on the ADD button. The Intial Connection window displays the added parameters.
Figure 3.24 - Parameters Added to Decoder
4. To delete a parameter from the Initial Connections window, select the parameter and click on the
Delete button.
5. Decoder parameters cannot be edited. The only way to change a parameter is to delete the original as
described above, and recreate the parameter with the changed settings and selections and then click
on the
Add
button.
6. AVDTP parameters are saved when the template is saved as described in on page 1 on page 1
TELEDYNE LECROY Chapter 3 Configuration Settings
45 Frontline BPA 600 Hardware & Software User Manual