Teledyne Lecroy Frontline BPA 600, Руководство пользователя по аппаратному и программному обеспечению, Страница: 307 / 348

Note: Samsung devices have a slightly different location for the btsnoop file.
There are two options for retrieving the HCI log from the Android device.
a. Attach the Android device to your computer. The file /sdcard/btsnoop_hci.log is in the root of one of
the mountable drives. Copy the file to directory C:/Users/Public/Public Documents/Frontline Test
Equipement/My Capture File/ .
b. The second option is to use the Android Debug Bridge (ADB)using the following steps. The debug
bridge is included with Android Software Developer Kit.
(1). On the Androd device Development screen, select Android debugging or USB debugging .
(2). Connect your computer and Android device with a USB cable.
(3). Open a terminal on your computer and run the following command.
adb devices.
(4). Your Android device should show up in this list confirming that ADB is working.
List of devices attached
XXXXXXXXXXX device
(5). In the terminal enter the following command to copy the HCI Log to your computer.
adb pull /sdcard/btsnoop_hci.log
A.2.4 Using the ComProbe Software to Get the Link Key
You will load the HCI Log file btsnoop_HCI.log into the ComProbe Protocol Analysis System on your computer
as a capture file. Then you can use the
Frame Display
to locate the link key.
1. Activate the ComProbe Protocol Analysis System. (Refer to the ComProbe BPA 600 User Manual on
fte.com).
2. From the Control window menu select File , Open Capture File... .
3. When the
Open
window appears, set the file type to
BTSnoop Files (*.log)
. If not already selected
navigate to the My Capture Files directory and select btsnoop_hci.log .
Appendicies TELEDYNE LECROY
Frontline BPA 600 Hardware & Software User Manual 299