Teledyne Lecroy Frontline BPA 600, Руководство пользователя по аппаратному и программному обеспечению, Страница: 260 / 348

5.1.6 Searching by Signal
Searching with Signal allows you to search for changes in control signal states for one or more control signals.
You can also search for a specific state involving one or more control signals, with the option to ignore those
control signals whose states you don’t care about.
The analyzer takes the current selected byte as its initial condition when running searches that rely on finding
events where control signals changed.
To access the search by time function:
1. Open a capture file to search.
2. Open the Event Display or Frame Display window.
3. Click on the Find icon or choose Find from the Edit menu.
4. Click on the
Signal
tab of the
Find
dialog.
Note: The tabs displayed on the Find dialog depend on the product you are running and the
content of the capture file you are viewing.
Figure 5.9 - Find Signal tab.
You will choose one qualifier—
Searching for event where
, then choose one or more control signals
Control Signals
The section with the check boxes allows you to specify which control signals the analyzer should pay attention
to when doing the search. The analyzer pays attention to any control signal with a check mark.
TELEDYNE LECROY Chapter 5 Navigating and Searching the Data
252 Frontline BPA 600 Hardware & Software User Manual