
bytes you would like to capture if the frame is larger than the allowable value indicated in the first
field.
3.
Channel Map
l
Clear on Resync
-used to clear the map each time a re-synchronization occurs
l
Send with Data
- allows you to send a map each time data is sent instead of just sending a map
when changes occur.
4.
Other Features
l
Directed Classic Connection
- Applies to
Classic Only Multiple Connections
The default configuration for
Classic Only Multiple Connections
is one master and two slaves.
The
Directed Classic Connection
allows for simultaneous sniffing of up to three masters and
three slaves in any combination. For example you can have one master with one slave along with a
second master with two slaves, or three one-master one-slave connections.
1. Click to place a check in the
Directed Classic Connection
check box.
2. Click
OK
. The
Advance Classic Settings
dialog will close.
3. In the
Devices Under Test
tab click on
Classic Only Single Connection
.
4. In the
Classic Device
drop-down lists
select the address of the devices to be
in your first link. Then right-click
anywhere in the dialog. A link selector
pop-up will appear. Click on
Save to
Link #1
. The pop-up will close.
5. Repeat the link selection process for
each additional link.
6. To review your saved links right-click
and select
View Directed
Connecctions
. All of your selections
will appear in the
Directed
Connections
pop-up window.
7. Click on
OK
to close the pop-up.
8. Selecting the
Classic Only Multiple
Connections
will display the same
information.
9. To reset the
Classic Only Multiple
Connections
to its default mode,
select any other datasource
configuration radio button and click on
the
Advanced
button. Click on
the
Dircted Classic Connection
check
box to remove the check. Click on
OK
.
The
Classic Only Multiple
TELEDYNE LECROY
Chapter 3 Configuration Settings
39
Frontline BPA 600 Hardware & Software User Manual
Содержание Frontline BPA 600
