3
INCLUDED IN YOUR PACKAGE
Handset
Base Unit
AC Adapter for LCD Display Function
Coiled Handset Cord
Two (2) Line Cords
Clear Plastic Overlay
User Guide
CONNECTING THE MILLENNIUM TELEPHONE
1. Located on the left side of the Millennium (as the phone is facing you) is a modular jack labeled TO HANDSET. Insert
one end of the coiled handset cord into this jack (you should hear the coil cord click when properly inserted).
2. Insert the other end of the coiled handset cord into the modular jack on the handset.
3. Turn the telephone so the back panel is facing you. Insert either end of a line cord into the jack on the back of the
telephone labeled LINE.
4. Insert the other end of the line cord into the jack on the AC adapter labeled TEL SET. If display functions are not being used,
insert this end of the cord into a telephone wall outlet jack and proceed to step 8.
5. Insert one end of the other line cord into the jack on the AC adapter labeled LINE.
6. Insert the other end of this line cord into a telephone wall outlet jack.
7. Plug the AC adapter into an available, unswitched electrical wall outlet. The Millennium’s backlit LCD should now display the
start-up messages.
8. Once your telephone is connected, remove the plastic overlay and place the paper faceplate over the keys. Replace
the plastic overlay by hooking the tabs on the overlay into the recessed slots located on both sides. The overlay is
easiest to insert when; the left or right side tabs are inserted first, and the middle of the overlay is slightly bowed to
allow for insertion of the other tabs.
LINE POWERED TELEPHONE FUNCTIONS
The Millennium telephone will function effectively in situations where AC power is interrupted or is not available. AC
powered Display Functions are described in MILLENNIUM DISPLAY FUNCTIONS on page 6.
The following features only require connection to an active telephone line(s).
SELECTING LINE 1 AND LINE 2
The Millennium’s MPC
TM
technology makes selecting the correct line as easy as lifting the handset. MPC technology
prioritizes the ringing or idle line and reduces the confusion of manually having to select a line.
PLACING A CALL
USING THE HANDSET
1. Lift the handset. The Millennium will select the appropriate “idle” line.
2. Listen for dial tone. Dial the desired number, or press a GUEST SERVICE AUTO DIAL key to automatically dial a
pre-programmed number.
3. To end the call, hang up by placing the handset back in the cradle.
USING THE SPEAKERPHONE
1. With the handset in the cradle, press the LINE 1 or LINE 2 keys. The Millennium will go off hook on the selected line
with speakerphone active.
MILLENNIUM USER’S GUIDE
