11
5. Press MENU twice. The LCD will display:
6. Press MENU again and the LCD will display:
7. Press SELECT. The LCD will display the currently programmed 1
st
Idle
Hotel Message. If it has not yet been
programmed the LCD will display:
Directly below the LCD, under the faceplate and hard plastic overlay are three keys, CHAR, NEXT and ERASE, used to
program characters into the display memory. See diagram on page 9 for their exact locations.
8. Press the CHAR button to choose the first character location. Continue pressing CHAR to change the character.
Press the ERASE key to erase the character and start again. If ERASE is pressed right after NEXT was pressed, the cursor will
backup one space and erase the previously selected character.
Note: The 1
st
location will be a blank <space> location. See Appendix B for the complete character set.
9. Press the NEXT button to accept the displayed character. The cursor will move to the next location. Repeat steps 8 and 9 to add
more characters to the message. When the first fifteen (15) characters have been selected, they will be replaced by the next fifteen
blank spaces.
10. When you have finished choosing all the characters for the first Hotel Message press SELECT to save the message. The
Millennium will also automatically save the message when 45 characters have been selected. The LCD will display:
and increment to the next location.
The LCD will change to:
