14
and increment to the next location. The LCD will change to:
11. Continue with steps 9, 10, and 11 to store additional Express Service Select records. If no additional records are to
be entered, remove and replace the line cord from the back of the Millennium to reset the phone for normal operation.
PROGRAMMING THE HOTEL MESSAGE(S) TO BE DISPLAYED
The Millennium can be programmed to present the Hotel Messages in a variety of different combinations. See MILLENNIUM
DISPLAY FUNCTIONS on page 6 for a complete description of the various options.
To set the Hotel Message(s) to be displayed:
1. Power off the Millennium by unplugging the line cord from the back of the phone.
2. Press and hold the SELECT button next to the LCD display.
3. Restore power to the Millennium by reinserting the line cord.
4. Continue pressing the SELECT button until the LCD displays:
5. Release the SELECT key and press MENU six (6) times. The LCD will display:
5. Press SELECT. The LCD will display the current selection. The default being SHOW HOTEL MSG1.
Next the display will change to show the 1
st
option:
6. Press MENU to review the available options. They are:
SHOW HOTEL MSG1
- This option will display the 1
st
message ONLY.
SHOW HOTEL MSG2
- This option will display the 2
nd
message ONLY.
SHOW HOTEL MSG3
- This option will display the 3
rd
message ONLY.
SHOW CONTINUOUS
- This option will display each message one after another.
SHOW EVERY 06HR
- This option displays Hotel Message #1 and then “updates” the displayed message to Hotel
Message #2 after a 6 hour period. Hotel Message #3 will be displayed after another 6
hours, cycling back to Hotel Message #1 after an incremental 6 hours.
