16
5. If no additional programming is required at this time, remove and replace the line cord from the back of the Millennium to reset
the phone for normal operation.
PROGRAMMING THE BACKLIGHTING
The Millennium LCD display can be programmed to turn off after a specified period of time, in increments of 10 seconds,
to stay on continuously, or not to go on at all. The default setting is 30 seconds. To change this setting:
1. From the above screen, press the MENU button 6 times until the LCD displays:
2. Press the SELECT button. The LCD will display the current setting, then switch to the 1
st
option:
3. Press MENU until the desired scroll time is displayed.
4. When the desired option is displayed, press SELECT to set. The LCD will display:
5. If no additional programming is required at this time, remove and replace the line cord from the back of the Millennium
to reset the phone for normal operation.
PROGRAMMING THE SCROLL RATE
The scroll rate is the speed in which the characters are replaced on the LCD display. When the Hotel Message is set for
Billboard Scroll (INTERLACE DISABLED), this is the rate in which each new letter is introduced on the LCD. The factory
default is 500 milliseconds (1/2 second). This rate can be changed to every 300 ms up to 900 ms, in increments of 100
ms. To change this rate.
1. From the above screen, press the MENU button 8 times until the LCD displays:
2. Press the SELECT button. The LCD will display the current setting, then switch to the 1
st
option:
