72
www.behnke-online.de
Instructions myintercom Plus IP video door intercom
Card reader for myintercom Plus
GB
You may now remove the second master card.
The display will turn off.
Please note:
Once you have programmed a
transponder as an authorised access card, you
cannot program the same transponder as a 2nd
master card. In this case, the display will jump
to the corresponding memory position.
Deleting the 2nd master card
It is not possible to delete the default master
card. To delete the 2nd master card, you will
need the “default master card”.
Hold the default master card to the card reader.
The memory positions will be counted all the
way up to 190 (“
1.9
”). Then, the following will be
displayed:
Remove the default master card from the card
reader. The display will light up for approx. 3
consecutive seconds and then start flashing for
approx. 6 seconds.
Hold the default master card to the card reader.
This will delete the 2nd master card, and the
right decimal point will turn off.
You may now remove the default master card.
The display will turn off.