49
www.behnke-online.de
Instructions myintercom Plus IP video door intercom
Introduction
GB
Integrated echo cancellation enables a full-
duplex connection from your smartphone or
tablet to your front door. Your door intercom
saves the last 20 events with camera image and
time stamp so that no call from the door is lost.
myintercome technology enables using existing
technology for video intercom connections.
myintercom turns your smartphone or tablet
into a remote station for communication with
your myintercom IP video door intercom. On
their smartphone or tablet, the user gets to see
who is at their front door, can talk to them and
can press a button on the smartphone or tablet
to open the door, where necessary.
Use WiFi (where all devices are connected to the
same WiFi network) or an internet connection
(3G / LTE) to transmit the video feed and sound.
The video door intercom system comes with
integrated illumination that you may turn on via
your smartphone or tablet in case of insufficient
light at your front door.
System Requirements
The following minimum requirements must
be met to use the myintercom IP video door
intercom station:
▸
For Behnke two-core technology: A two-core
telecommunication wire (e.g. IYSTY max.
100m. This wire must not carry any other
voltages or signals between the two-core
transmitter and the two-core receiver)
1.
introduction
1.1. What’s in the box
▸
myintercom One IP video door intercom or
myintercom Plus IP video door intercom
▸
Instructions
▸
Supplement sheet “digital identification”
▸
When using two-core technology:
•
2 pc. coaxial converters
•
2 core receivers for installation inside the
protected inner area (please follow installa-
tion advice for two core transmitters /
receivers)
▸
When also using a fingerprint reader / RFID
reader / code lock, please see the manual
concerning these extensions as well as the
evaluation unit (to be installed in the inner
area) for these extensions.
1.2. General Information
Features
The myintercom IP video door intercom is a com-
pact device with an integrated camera, speakers,
microphone and possibly extension modules like
fingerprint reader / RFID
reader / code lock (with stand-alone evaluation
units). It provides for up to three call buttons
with an illuminated label.
The integrated tamper contact provides for addi-
tional safety and comfort when combined with a
detached safety relay sold individually.