Telecard R-002PP, Руководство по эксплуатации

Страница: 41 / 47

ААН3.464424.027.61 РЭ p.41
l) In reception mode the output signal level of the Transceiver is controlled.
If the output power le el is not adequate to the preset output power, then the “
*
”
symbol appears in the (4,13) position.
m) indication in the (4,14) shows the battery state indication (5 dashes
– full
charge battery).
2.3.2.2 Supplementary Data on Fixed Frequencies Indication
Example, when the radio operates on fixed frequencies in simplex mode, is shown
in Figure 24. Hereafter the display shows the additional information to the abovementioned
general information in terms of the r
adio’s operating frequency. The radio’s operating
frequency is displayed in positions from (1,9) to (1,15), where:
-
(1,9)
– hundreds of megahertz;
- (1,10)
– dozens of megahertz;
- (1,11)
– units of megahertz;
- (1,12)
– hundreds of kilohertz;
- (1,13)
– dozens of kilohertz;
-
(1,14)
– units of kilohertz;
- (1,15)
–hundreds of hertz.
Example, when the radio operates on fixed frequencies in double-frequency
simplex mode, is shown in Figure 25. Thereafter the display shows the additional
information to the abovementioned general information in terms of receiving frequency and
transmission frequency. Receiving frequency is indicated in positions from (1, 9) to (1, 15),
and transmission frequency is indicated in positions from (2,9) to (2,15). These positions
indicate the following:
- (1, 9), (2, 9) - hundreds of megahertz;
- (1, 10), (2, 10) - dozens of megahertz;
- (1, 11), (2, 11) - units of megahertz;
- (1, 12), (2, 12) - hundreds of kilohertz;
- (1, 13), (2, 13) - dozens of kilohertz;
- (1, 14), (2, 14) - units of kilohertz;