Telecard R-002PP, Руководство по эксплуатации

Страница: 28 / 47

ААН3.464424.027.61 РЭ p.28
-
adjustment of radio output power level
-
volume control
This will be enough to operate the radio by the unskilled personnel.
1.5.2
Radio’s software provides channel programming before and during radio
performance. While programming the radio the following parameters are added to radiodata:
-
operating frequency;
-
emission class;
-
technical masking mode;
-
power output level;
-
type of external devices;
-
SMS messages (30 groups, eight-character each);
- programming password;
- masking key.
While operating the radio, it is possible to control it, using the keypad on the front
panel of the radio.
Channel programming is done through the Fillgun and the PC.
1.6 Meters, Tools and Accessories
1.6.1. In cases of malfunction, the built-in control system identifies fault place
accurate within the Standard Substitute Element.
Note. The repair of the Standard Substitute Elements is done by the specialists
of the manufacturing plant.
1.6.2. To measure the voltage between the battery pack terminals, an APPA 107
meter or the similar meter, must be used.
1.7 Marking and Sealing
1.7.1. Radio name as well as the manufacturing plant logo is on the front cover
of the radio. Radio number is on the nameplate, which is inside of the housing for battery
pack connection.
1.7.2. All the radio controls, connectors, indicators and components have
appropriate markings that explain their usage.
Letterings are made using technique to ensure its durability during the service life of
the radio.
1.7.3. Nameplates with the type of the component parts and its serial numbers
are fixed on its housings.