Telecard R-002PP, Руководство по эксплуатации

Страница: 15 / 47

ААН3.464424.027.61 РЭ p.15
-
display, marked with 7;
-
silicone keypad, marked with 8.
RF- connector of the BNC-type, marked with 9, for antenna connection, connector,
marked with 10, for headset connection, rotary power switch, marked with 11 are on the top
panel of the housing. The top panel view is shown in Figure 7.
Connector, marked with 12 (marked with (“DATA”) lettering) for fillgun connection is
on the left side of the housing. The PC and special equipment for data communications is
connected to the same connector.
On the same side the housing the following buttons are placed:
-
button, marked with 13, for volume control;
-
button, marked with 14, to switch the radio from receive mode to transmit mode
during oice communications (hereinafter referred to as “PUSH-TO-TAL ” button);
- button, marked with 15, to transmit tone call.
To operate in the transmit mode the “PUSH-TO-TAL ” button should be pressed,
and in recei e mode the “PUSH-TO-TAL ” button should be released.
The housing has special notches to fix the battery pack retainer, marked with 4. To
connect the battery pack, spring-loaded pins, marked with 16 (are shown in Figure 8) are on
the housing. Battery pack assembling view is shown in Figure 8.