Telcoma PASSO FM400, Инструкция по эксплуатации

Страница: 34 / 60

GB
Introduction of the USER code
-
-
- enter:
- 01# for USER code assigned to channel 1
- 02# for USER code assigned to channel 2
- 03# for USER code assigned to channel 3
- 04# for USER code assigned to channel 4
the led ¤ starts flashing
- enter the USER code to be memorised, followed by # (e.g. 1234); a
beep is emitted
-
- The keypad exits the programming phase after approx. 10 seconds of
inactivity
press and hold the # key for approx. 2 seconds until the keypad beeps
once
introduce the MASTER code followed by # , the LED emains on
Proceed as above for any additional codes
Example:
¤
#
2 sec.
2233#
MASTER
code
01#
command
1234#
new USER
code
34