Telcoma PASSO FM400, Инструкция по эксплуатации

Страница: 37 / 60

GB
IMPORTANT WARNINGS
INSTALLATION
Do not install PASSOFM400 on metal surfaces!
Make sure the desired distance can be covered before fixing the keypad to
a surface.
CODES
After having keyed in the code, PASSOFM400 continues to transmit all the
time the
# key is pressed.
After the code has been transmitted with the # key, the transmission can
be repeated by pressing the # key once again within 5 seconds.
PASSOFM400 ignores the number zero at the beginning of a code, for
example: the code 0438 is recognised as 438.
BATTERY REPLACEMENT
If the range decreases or the red LED flashes during the transmission,
replace the battery with another having the same characteristics.
Make sure that the poles are positioned correctly (see fig. 1 detail 3).
BACKLIGHTING
Press the # key during the night to illuminate the keypad and then
introduce the code followed by #.
TELCOMA S.r.l. reserves the right to make modifications at any time they
deem necessary for the aesthetical and/or functional improvement.
¤
37