TelcoBridges Tmedia TMP800, Руководство по установке

Страница: 31 / 46

Initial System Configuration
25
Note
Do not confuse the gateway port (also known as System ID) with the IP gateway
address.
The gateway port is used to control the Tmedia units and TelcoBridges strongly
recommends that this setting be left at its default value: 12358.
Tmedia units on the same gateway port will be automatically detected by any Toolpack
application.
Different gateway ports can be useful for the segmentation of systems configured to
operate on the same physical network and IP subnet. Make certain that all applications in
the same system are configured to use the same values.
This is described in the Toolpack Installation guide; for further information, contact
TelcoBridges Technical Support.
Note
The management interface is reserved for future use.