TelcoBridges Tmedia TMP800, Руководство по установке

Страница: 19 / 46

Equipment Connections
13
2.4.3 Connecting to the Serial Port of the TMP800
To communicate with the Tmedia control network, you must first connect your computer to the serial
port of the TMP800 unit and configure the initial network settings that will enable communication with all
of the Tmedia units of your network.
To connect to the serial port of a Tmedia unit:
1. Connect a RJ45 CAT5 straight cable (supplied with unit) between the com port of your computer
and the serial port (labelled RS-232) of the TMP800 as shown in Figure 2.4 on page 13. See
Section 2.6 “Console pinout” on page 14 for a RJ-45 pinout description.
2. If your computer’s serial port features a DB9 connector, use the DB9 to RJ45 adapter supplied with
your Tmedia unit. If your computer's serial port features a USB connector, you will need to provide
a USB to DB9 adaptor. Refer to Figure 2.5 on page 13.
Figure 2.4 Computer to TMP800 Serial Port Connection
Figure 2.5 Conceptual View of a Serial Connection from the TMP800 to a Computer
Serial Port to the Computer
ETH
ETH
1 2 RS-232 3
1 8 7 6 5 4 3 2
Tmedia
RJ45
DB9
DB9 to USB Adaptor