41
Installing the Equipment
2.6
Add a 3200 1 Unit to a Standalone, Creating a 3200
Series 1+1 System
Warning:
This procedure will require some system downtime.
In order to add a 3200 1 unit to a 3200 series standalone unit, you must perform the following
procedures:
•
2.6.1 “Reconfigure a Standalone Unit as a Primary Unit in an 3200 Series 1+1 System”
•
2.6.2 “Install the 3200 1 Unit on the Equipment Rack”
•
2.6.3 “Install a 1+1 Patch Panel”
•
2.6.4 “Connect to the 3200 Series 1+1 Management Interface”
•
2.6.5 “Connect to the 3200 Series 1+1 Control Network”
•
2.6.6 “Connect to the VoIP Network”
•
2.6.7 “Connect to the PSTN Network”
•
2.6.9 “Power Up the 3200 Series 1+1 System”
•
2.6.1
Reconfigure a Standalone Unit as a Primary Unit in an 3200 Series
1+1 System
1.
Connect to the web portal of the standalone 3200 series unit.
2.
Select
Hosts
from the navigation panel.
